Connecting to Flarm All cables that are supplied with each new Oudie are designed to work directly with Flarm. The main cable that you...
Cables and converters Oudie 2 and Oudie IGC is delivered with a variety of cables and converters which enable you to connect Oudie...
Connecting to the GPS source There are three basic ways to connect Oudie to the GPS source: 1. Built-in GPS 2. Serial cable connection to...
Finding the right COM port and baude rate When you try to connect an external device to Oudie with a serial cable and it doesn’t work out of...
Connect to LXNAV Nano by Bluetooth? The recommended way to connect to the brilliant LXNAV Nano flight recorder is by Bluetooth: 1. Enable bluetooth on Nano (use the...
Pinout for Oudie Power cable with RJ45 connector Pinout for Oudie serial cable with RJ45 connector: 1 & 2 = +12V 3 & 4 = no function 5...
Cambridge L-NAV and S-NAV Our UK agent Dickie Feakes is greatly knowledgeable about the old Cambridge instruments. He put together the following tutorial about...
Pinout for LX 7007 / LX 160si / LX 1600 cable LX DB9/MALE pin1 – GND pin3 – RX (Receive to Oudie) pin4 – TX (Transmit from Oudie) pin5 – GND...
Pinout for CAI 302 / Zander Rotary switch / Baumi cable CAI DB9/MALE pin1 – GND pin2 – RX (Receive to Oudie) pin3 – TX (Transmit from Oudie) pin5 – GND...