Connecting to Flarm
All cables that are supplied with each new Oudie are designed to work directly with Flarm. The main cable that you...
Connecting External Devices
Cables and converters
Oudie 2 and Oudie IGC is delivered with a variety of cables and converters which enable you to connect Oudie...Connecting to the GPS source
There are three basic ways to connect Oudie to the GPS source: 1. Built-in GPS 2. Serial cable connection to...Finding the right COM port and baude rate
When you try to connect an external device to Oudie with a serial cable and it doesn’t work out of...Connect to LXNAV Nano by Bluetooth?
The recommended way to connect to the brilliant LXNAV Nano flight recorder is by Bluetooth: 1. Enable bluetooth on Nano (use the...Pinout for Oudie Power cable with RJ45 connector
Pinout for Oudie serial cable with RJ45 connector: 1 & 2 = +12V 3 & 4 = no function 5...Cambridge L-NAV and S-NAV
Our UK agent Dickie Feakes is greatly knowledgeable about the old Cambridge instruments. He put together the following tutorial about...Pinout for LX 7007 / LX 160si / LX 1600 cable
LX DB9/MALE pin1 – GND pin3 – RX (Receive to Oudie) pin4 – TX (Transmit from Oudie) pin5 – GND...Pinout for CAI 302 / Zander Rotary switch / Baumi cable
CAI DB9/MALE pin1 – GND pin2 – RX (Receive to Oudie) pin3 – TX (Transmit from Oudie) pin5 – GND...Universal Y/R Oudie version cable converter
Oudie 2 has got a small hardware revision in September 2019. As a consequence a USB pinout has changed: 1 =...
Need Support?CONTACT SUPPORT
English
Deutsch
Français
Italiano
Español
Polski