Connecting to Flarm

All cables that are supplied with each new Oudie are designed to work directly with Flarm. The main cable that you should use is the Oudie Power cable:

1. The red and black wire must be connected to 12V battery supply.

2. The mini USB is connected to Oudie

3. The RJ45 connector is designed to be connected directly to Flarm. It has the IGC standard pinout

By connecting these cables the Flarm will also be powered through the Oudie Power cable.

If you have problems finding the right baude rate for communication please follow the instructions here: Finding the right COM port and baude rate. Usually the Flarm uses 19200 bps.

Updated on March 18, 2021

Was this article helpful?

Related Articles