For those who prefer keyboard over the mouse, there are several short cuts which make using SeeYou easier and quicker.
1. SeeYou main window – whole Application:
Ctrl + O = Open
Ctrl + S = Save (this command works differently for Flight, Waypoints and Tasks window)
Ctrl + A = Animation
Ctrl + W = Waypoints window
Ctrl + T = Tasks window
Alt + 1 = Route view
Alt + 2 = 3D view (if enabled)
Alt + 3 = Graph view
Alt + 4 = Statistics
Ctrl + 1 = Show/Hide Waypoints
Ctrl + 2 = Show/Hide Airpsace
Ctrl + 3 = Show/Hide Vector maps
Ctrl + 4 = Show/Hide Raster maps
2. Route window
-> one fix forward
<- one fix back
Ctrl + -> next circling
Ctrl + <- previous circling
Ctrl + Up Zoom in
Ctrl + Down Zoom out
Ctrl + B Zoom Back
Alt + -> next Waypoint
Alt + <- previous Waypoint
left-click + drag the mouse = What this action does depends on which mode the Route view is in. It can be either:
- Zoom mode. Clicking mouse left button and dragging it over the screen will zoom into the selected area.
- Pan mode. Clicking mouse left button and dragging it over the screen will move the map.
- Measure mode. Clicking mouse left button and dragging it over the screen will measure distance and bearing between two points.
F2 key switches between these three modes.
Alt + left-click (hold the Alt key and drag mouse) = Ruler, measuring distance
Shift + ->
Shift + <
Shift + Home
Shift + End :
- Where Shift is pressed, first marker is set.
- Navigate with arrows and/or Home and End buttons to set the second marker.
- After setting markers, you can view statistics for the selection you made or you can optimize the flight for the selection only.
Ctrl + L Optimize task
Ctrl + I Airspace check
3. 3D view
To change camera position do this:
- Left button and move – change perspective
- Right button and up/down – zoom in/out
- Both buttons and left/right – animation speed
Up arrow = Zoom in
Down arrow = Zoom out
Shift + Left/Right = Rotate horizontal
Shift + Up/Down = Rotate vertical
Ctrl + F7 will lock or unlock the view relative to the glider
Ctrl + F8 will tell you all parameters about focus, camera position and orientation.
Ctrl + F11 will decrease focal length
Ctrl + F12 will increase focal length
4. Tasks window
If the task list is active, using this combination will add or remove a task. If task waypoints are active, using this combination will add or remove a waypoint from the task.
Ctrl + Ins to insert a waypoint or create a task ,
Ctrl + Delete to delete a waypoint or task ,
In map view use mouse right-click and mouse double-click .
Shift in map view = Hold shift and click to create a new waypoint .
Ctrl + Up = Zoom out
Ctrl + Down = Zoom in
In vicinity of a waypoint used in task, the mouse pointer changes to WPT. Click mouse left button once and move the point somewhere else. In vicinity of a leg the mouse pointer changes to LEG. Double click mouse left button and you have inserted a waypoint to the leg.
5. Waypoints window
In Map view use :
Mouse click to select a single waypoint
Shift + Mouse click to select multiple waypoints
Shift + click + drag mouse to select waypoints from a rectangle
In List view use :
Ctrl + Ins to create a waypoint
Ctrl + Delete to remove a waypoint
In map view use mouse right-click and mouse double-click .
Ctrl + Up = Zoom out
Ctrl + Down = Zoom in
Ctrl+C = Copy to clipboard when Waypoints are selected
(Ctrl+V = Paste in Excel)